Welcome to www.pressroomelectronics.com

Sales: (800) 937-4334
       Service: (630) 443-9343
 

 

 

Pressroom Electronics US Manufacturer of Press Controls

 
 
 

Time Based Brake Monitor

Please choose from the products listed below:

 

 BM 1600

BM-1600
The BM-1600 is a time-based brake monitor that utilizes a high resolution encoder and controller to measure the brake stopping time in milliseconds and also the RPM/SPM of the press. The rotary encoder is attached to the subject machine and is driven on a 1:1 ratio by the power press crankshaft. The brake stopping time of the machine will be displayed on every stop and can be easily read on the bright red light emitting diode (LED) display on the front panel of the unit. The RPM/SPM of the machine will be displayed during the machine cycle.

 Presscommander

Touchscreen

Presscommander
Exceeds OSHA 1910.217 & ANSI B11.1-2009, "Control Reliable Design," with dual logic power supplies, heavy duty resolver, System diagnostics and programming in plain English/Spanish which can control up to four sets of operator stations, Major faults such as E-Stop, motion, brake monitor, and sensor faults are handled by two force-guided relays (Form B safety relays), Off--inch--single--continuous, Continuous ARM; top stop, anti-tie down and anti-repeat, SPM Range (1 to 500), Password and supervisory controlled keyed selector switch for security of data entry, Interrupted stroke provision with indicator, Inch mode monitoring, Crank angle and speed readout (SPM), Time-based brake monitor, Built-in motion detector and drift fault, 90° and 270° stop time tester/meter built-in, Built-in hour meter for maintenance, Built-in variable speed compensation, Servo-feed interface built-in, Six optically isolated die protection inputs, Six PLS (programmable limit switch) output relays, 100 job memory, Stroke, batch, quality, and part counters, Batch counter output relay, Die protection output relay, Speed output relay, Auxiliary output relay, Optional Ethernet or DeviceNet and PC Link to allow offline job creation and storage.  Optional 10.1" color touchscreen replaces the standard display shown.  Touchscreen is show to the left.

 PressCam8

PressCam 8
PressCam 8 is a "control reliable" resolver based programmable cam switch, time-based brake monitor, die protection system, multiple counters, and much more in one package. The system contains two 16-bit computers that are configured to cross check each other and the resolver. The dual computers are interfaced with a full view 8" (203mm) diagonal LCD computer screen for viewing and programming ease. This large operator screen supplies operators and front line supervisors production data without the need of cumbersome menu and program access codes. The PressCam 8 has a large 100 job memory.

PressCam 8 Junior 

PressCam 8 Junior
The PressCam 8 Junior is a resolver-based press automation controller that incorporates a programmable cam limit switch, timed-based brake monitor, servo feed control, four counters, and a die protection system The PressCam 8 Junior is controlled by a 16-bit computer that constantly checks the resolver for accuracy. The PressCam 8 Junior has a large 99 job memory.

 
Pressroom eNewsletter
Subscribe to our mailing list and you will receive information on new products, Trade Show appearances and answers to your questions.

Need a Quote? Contact our Sales Department >> 

Need Tech Support? Contact our Engineering Department >>

Pressroom Electronics