Features
– Model 3200SS Control Panel
– Expandable
– Brake Monitor
– Two Hand Anti-Tie Down
– System Control Reliability
– Single Stroke
– Self-diagnostic system
– Self-contained message display for system status and diagnostics
– Non-Resumption of interrupted stroke
– Provisions for Auxiliary Equipment
– PSDI Presence Sensing Device Initiation
– Two-Year Warranty

The control panel 3200SS is included in the 1500SS Package.

Dual Solenoid Valve
The dual solenoid valve is monitored and contains a pressure controlled spool in an assembly mounted between the pilot and valve body assemblies. Pressure signals are applied to each end of the monitor spool. If these signals differ by more than a built-in design limit, they cause the spool to shift to a latched position. The spool movement causes the pilots to be exhausted and pilot supply air to be vented to the atmosphere, thus rendering the valve inoperable. The monitor must be reset by unlatching the spool before another valve cycle can be initiated.

Operator Station
No. UL-501 Two Ergonomic UltraTouch modules mounted on a NEMA 12 operator station run bar with a red mushroom emergency stop button located in the center and a yellow mushroom top stop button located off center. This style assembly is ideal for the metal stamping/metal fabrication industry. All the modules are mounted in accordance to OSHA, ANSI, and CSA standards in regards to run button spacing.

Heavy Duty Pressure switch No. 306
This NEMA 12 oil-tight and dust-tight switch is adjustable from 1 to 115 PSI.

Filter Regulator Lubricator No. 311

Rotary Cam Switch with Drive Check No. 310A
This NEMA 12 rotary switch provides limit switch functions required by control system. Spring-loaded mounting absorbs shock and will stop the press should the drive chain break. Cams are easily adjusted with tool provided.

Fused main power Disconnect (IEC or NEMA)
Magnetic motor starters (IEC or NEMA)
Rotary Cam Limit Switches
54-003 – Model BM-1600 Time Based Brake Monitor mounted in a control panel (with encoder)
Micro-Inching function
Light Guard on/off supervisory controlled key switch (IEC)
Multiple operator station control key switch (IEC)
Bar Turnover function (IEC)
Die Block receptacle outlet
Shutdown timer
110VAC outlet
220VAC outlet (specify load)
5 Digit resettable LCD counter (battery powered) 2.8” x 1.5” (Part Number 39-026)
Remote Operator Interface Panel
NEMA Style Indicators & Switch gear on control panel to replace IEC Style
Automatic External Trip
SSM-10 without IEC switchgear (at time of purchase)
SSM-20 with IEC switchgear (key switches & push buttons)

Continuous on Demand
SSM-10 without IEC switchgear (at time of purchase)
SSM-20 with IEC switchgear (key switches & push buttons)

(For Custom Programming & Remote Field Upgrades, please consult factory at service@pressroomelectronics.com or (630) 443-9320.)

GUARDING:
Safety Light Curtain (up to four sets of pylons, specify size)
(see Pinnacle Systems, Inc. website for models)

11-072      Steel master/slave/power/relay stack cover (white)

20-001      1A Slo-Blo glass 3AG fuse
20-018      1A Fuse (plastic standup micro, in 24vdc output)
20-022      1A Slo-Blo nano SMF fuse

26-016      Diagnostics Status Display label (overlay)
30-012      24vdc @ 2.2A power supply (90-260vac In) 3.9” L x 3.8” W x 1.4” H (99.1mm x 96.5mm x 35.6mm)
32-101      4 pole 12 VDC (clear KACO safety relay)
39-026      Standalone five digit counter with reset.

42-004      Master software Chip (please note rectangular or square)
42-005      Slave software Chip (please note rectangular or square)

52-032      Diagnostics Status Display unit
52-071      Ribbon cables
52-093      Master/Slave 12 conductor Input Cable (52”) Double ended female
52-119M    Master computer board (no CPU)
52-119S     Slave computer board (no CPU)
52-120      Power supply/Relay board (with relays)

Click here: Installation Manuals

Click here: Literature

Click here: Contact Sales

Click here: Contact Service