SSM-20
Overview
The Short Stack Plus (Part #SSM- 20) encompasses all of the features and components of the SSM-10 (see page 24 for complete list of features) plus all of the following switches, legend plates, push buttons, and indicator lights for easy mounting into your existing control panel. Complies with section 1910.217 of the Federal Register and ANSI B11.1-2009.
To see complete overview please Click Here:
Feature Listing for SSM-10 and SSM-20:
• Control reliable redundant control module
• Diagnostic Message Display
• Fused transformer
• Control module pre-wired to terminal strip
• Pressure clamp terminal strip
• Mounted on a 17″ (432mm) x 18″ (457mm) backplate
• Wiring diagram and complete installation instructions
supplied
• Modes of operation off – inch – single – continuous
• Continuous ARM
• Top stop
• Anti-tie down and anti-repeat
• System start/stop functions
• SPM Range – 1 to 500
• Control reliable design
• Interrupted stroke provision with indicator
• Inch mode monitoring
• Control module provides anti-tie down and concurrency
function for up to four sets of operator stations
• Light curtain mute-out on upstroke standard
• Clutch/brake module designed to fit into tight spaces.
Printed circuit board dimensions; only 6.5″ (165mm) x
5″ (127mm) x 4″ (102mm) including standoff.
• Control systems are captively designed, manufactured,
and supported.
• Self-contained plain English message display
• Self-diagnostic system
• The control module monitors the signals and circuits
as specified by OSHA and ANSI standards
• Control incorporates dual logic power supplies
• Two-year warranty on control module
Download Language: English Size: 358 KB File Type: PDF
Part Number Description
11-072 teel master/slave/power/relay stack cover (white)
20-001 1A Slo-Blo glass 3AG fuse
20-018 1A Fuse (plastic standup micro, in 24vdc output)
20-022 1A Slo-Blo nano SMF fuse
26-016 Diagnostics Status Display label (overlay)
30-012 24vdc @ 2.2A power supply (90-260vac In) 3.9” L x 3.8” W x 1.4” H
(99.1mm x 96.5mm x 35.6mm)
32-101 4 pole 12 VDC (clear KACO safety relay)
39-026 Standalone five digit counter with reset.
42-004 Master software Chip (please note rectangular or square)
42-005 Slave software Chip (please note rectangular or square)
52-032 Diagnostics Status Display unit
52-071 Ribbon cables
52-093 Master/Slave 12 conductor Input Cable (52”) Double ended female
52-119M Master computer board (no CPU)
52-119S Slave computer board (no CPU)
52-120 Power supply/Relay board (with relays)
Description
• Fused main power Disconnect (IEC or NEMA)
• Magnetic motor starters (IEC or NEMA)
• Rotary Cam Limit Switches
• 54-003 – Model BM-1600 Time Based Brake Monitor mounted in a control panel (with encoder)
• Micro-Inching function
• Light Guard on/off supervisory controlled key switch (IEC)
• Multiple operator station control key switch (IEC)
• Bar Turnover function (IEC)
• Die Block receptacle outlet
• Shutdown timer
• 110VAC outlet
• 220VAC outlet (specify load)
• 5 Digit resettable LCD counter (battery powered) 2.8” x 1.5” (Part Number 39-026)
• Remote Operator Interface Panel
• NEMA Style Indicators & Switch gear on control panel to replace IEC Style
• Automatic External Trip
SSM-10 without IEC switchgear (at time of purchase)
SSM-20 with IEC switchgear (key switches & push buttons)
• Continuous on Demand
SSM-10 without IEC switchgear (at time of purchase)
SSM-20 with IEC switchgear (key switches & push buttons)
(For Custom Programming & Remote Field Upgrades, please consult factory at service@pressroomelectronics.com or (630) 443-9320.)
GUARDING:
Safety Light Curtain (up to four sets of pylons, specify size)
(see Pinnacle Systems, Inc. website for models)
Click here: Installation Manuals
Click here: Literature
Click here: Contact Sales
Click here: Contact Service